INSPIRE 60 acro R/C Nitro Airplane

INSPIRE 60 acro  Nitro Airplane

INSPIRE 60 acro INFO
Fliton proudly introduces the new Inspire 60 Acro (Hybrid) ARF, perhaps our
best performing product to date. The Inspire 60 demonstrates unique precision
and 3D flying qualities that are often discussed about, but rarely delivered by
any single airplane. The Inspire exhibits rock-solid precision flying, extremely
straight lines with instantaneous snap-roll recovery and full or fractional snaps
upon stick release. By moving to high rates, the Inspire is a 3D demon with completely
steady upright and inverted harriers, stable controllable hovers aided by the large,
full length ailerons, and laser-straight knife edge performance.

Thanks in part to the huge rudder, experience plenty of reserve power on the backside
of knife edge loops without any adverse coupling. Most planes require different prop
and CG setups for optimal 3D and precision, while the Inspire does it all with its stock setup.
Right behind the awesome performance delivery of the Inspire 60, is a complimentary 3"
velcro strip, an "easyUP" motor mount assembly, upgraded wheels, and a large built-up
removable top hatch also allows for easy access to your components.
Transportation on and off the field is a breeze, as the removable main wing attaches to
a durable 2-piece carbon wing tube. The build itself is very straightforward and electric
conversions are done with ease. Witness this visual masterpiece and many other
wonderful features the Inspire 60 Acro has to offer today!

 
SPECIFICATIONS
Wingspan : 1,540 mm / 60.62 inches
Lenght : 1,570 mmmm / 61.81 inches
Flying Weight : 2,400 ~ 2,800 g / 5.29 ~ 6.17 (electric) lbs.
Empty Weight : 1,338 g / 47.23 oz (2.95 lbs)
Main Wing Area : 46 sq dm2
Wing Loading : 19 oz/ft2
 
FEATURING
Step-by-Step Manual, Custom Decals
Pre-painted & Pre-cut Fiberglass Cowl
Airfoiled Control Surfaces, Removable Hatch
FRP Landing Gears. FRP Wheel Pants.
Carbon Wing Tube. Two piece Main Wing.
Tail Wheel Set. Fuel Tank. Engine Mount.
Pushrods, Control Horns and more..
 
REQUIRES
Radio : 4 Channel Radio
E.S.C : 25A Electric Speed Controller
Servo : (4) Hitec HS-55 or 65HB
Battery : Fliton F1200mAh Li-Po (max 20c, 3S1P 11.1 Volt)
Motor : Hacker A20-20L
 
RECOMMENDED SETUP
Below are tested recommendations. Individual performance results may vary,
use at customer's own discretion.
 
Moderate Flying Setup
Servos: (4) Hitec HS-5245MG
Engine: Saito 82 or YS 63 (25% Nitro)
Motor: Hacker A50 :16S
             E-Flite Power 46BL
Battery: 6s2p (2)4200mAh 3s2p in series
Propeller: 17 x 10 E or 14 x 4 Wood (Glow)
Speed Controller: Opto 77A
Center of Gravity: 3/4" behind wing tube

 Advanced Flying Setup
Servos : (3) Hitec HS-5245 Digital Servos
               (1) Hitec HS-5945 Digital Rudder Servo
Engine: Saito 100 or YS 91 (15~25% Nitro)
Motor: Hacker A50:12S
             E-Flite Power 60BL or AXI 4130/16
Battery: 6s2p (2)4200mAh 3s2p in series
Propeller: 17 x 8 E or 14 x 4 Wood (Glow)
Speed Controller: Opto 77A
Center of Gravity: 3/4" behind wing tube
 
 
RATIO SET-UP AND FLIGHT TIP
Rates below are provided only as a guide. Your rates may vary based on desired performance.
 
Control Surface Deflection
  3D SPORT TRAIN
Elevator: (U/D) 3 3/8" 2 1/2" 1 3/4"
Rudder: (L/R) 4 1/2" 3 1/2" 2 1/2"
Ailerons: (U/D) 3 3/4" 2 1/2" 1"
  3 1/4" 2 1/4" 7/8"
 Exponential
  3D SPORT TRAIN
Elevator: (U/D) 57% 46% 36%
Rudder: (L/R) 55% 48% 37%
Ailerons: (U/D) 62% 50% 41%